Description:
utility for monitoring a motherboard - the temperature, voltage, fan speed, as well as the temperature hard drives (if they support this feature).
It is a positive feature of SpeedFan, this program distinguishes among the similar - the ability to change the fan speed, including,
depending on the temperature inside the system unit.
The program is a compact but very functional tool to monitor the computer's hardware. Allows you to read voltage, fan speed and temperature monitoring with the chips.
Displays data about the state of the parameters SMART, as well as the temperature hard drives. Works with the HDD interface EIDE,
SATA and SCSI (most of the "software» IDE / SATA RAID controllers, unfortunately, is not supported). You can also adjust the system bus frequencies on some motherboards,
but development in this direction is actually frozen. Works in the operating systems Windows 9x, ME, NT, 2000, 2003, XP, Vista and 7, as well as x64.
The main highlight of the program is to adjust fan speed depending on conditions (eg temperature of the processor), but again, if you have hardware support equipment.
Additionally, you may collect statistics on removable parameters and record the information in the log-file, draw graphs of temperatures, voltages and fan speeds.
Please see the list of supported sensors, motherboard, allowing to change the fan speed, and hard disks can be on the official site
Changelog:
- Greatly improved DELL support
- NVidia I2C support works again with driver 275 +
- Now ATI Radeon support resets Manual Fan Control to the state it had when SpeedFan was started (no more unexpected video card fan set to 100% on program exit)
- Added support for Intel X79 (Patsburg) SMBus
- Added support for ServerWorks HT1000 SMBus
- Added SAT support for USB enclosures
- Added support for USB enclosures using SunPlus, IoData and Logitech chipsets
- Added voltage reading tweaks and configurations for several Intel motherboards
- Added full support for Fintek F71858AD
- Rewritten Areca RAID support and improved support for Areca SAS controllers
- Slightly refactored hard disk USB vendor guessing
- Added support for AMD Family 12h (LLano) temperature
- Added support for AMD Family 14h (Bobcat) temperature
- ATK0110 tries to find the best interface when multiple ones are available in ACPI BIOS (please, report if support is broken for your motherboard model)
- Added preliminary support for Fujitsu-Siemens Hades
No comments:
Post a Comment